Process integration

[1]
M. Kermani; I. Kantor; A. Wallerand; J. Granacher; A. Ensinas et al. : A Holistic Methodology for Optimizing Industrial Resource Efficiency; Energies. 2019-04-05. DOI : 10.3390/en12071315.
[2]
M. Kermani; I. D. Kantor; F. Maréchal : Optimal Design of Heat-Integrated Water Allocation Networks; Energies. 2019. DOI : 10.3390/en12112174.
[3]
D. Favrat : Filiéres de conversion d'energie - partie 1, note de cours. 2018-12-12.
[4]
A. S. Wallerand : Refrigerant selection tool. 2018-09-21.
[5]
F. Baldi; F. Ahlgren; T.-V. Nguyen; M. Thern; K. Andersson : Energy and Exergy Analysis of a Cruise Ship; Energies. 2018-09-20. DOI : 10.3390/en11102508.
[6]
F. Baldi; K. Tammi; F. Maréchal : Process integration as a tool for the improvement of cruise ships energy efficiency. 2018-09-06. Shipping in Changing Climates, London, United Kingdom, September 4-5, 2017.
[7]
F. Belfiore; F. Baldi; F. Maréchal : Exergy Recovery During Liquefied Natural Gas Regasification Using Methane as Working Fluid. 2018-08-30. Conference on Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction, Prague, Czech Republic, August 25-29, 2018. DOI : 10.3303/CET1870090.
[8]
H. Bütün; I. Kantor; F. Maréchal : A heat integration method with location-dependent heat distribution losses. 2018-08-01. International Symposium on Process Systems Engineering – PSE 2018, San Diego, California, USA, July 1-5, 2018. p. 1195-1200. DOI : 10.1016/B978-0-444-64241-7.50194-4.
[9]
F. Baldi; L. Wang; F. Maréchal : Integration of solid oxide fuel cells in cruise ship energy systems. 2018-06-22. ECOS 2018 - 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guimaraes, Portugal, June 17-22, 2018.
[10]
M. A. Ancona; F. Baldi; M. Bianchi; L. Branchini; F. Melino et al. : Efficiency improvement on a cruise ship: Load allocation optimization; Energy Conversion and Management. 2018-05-15. DOI : 10.1016/j.enconman.2018.02.080.
[11]
H. Bütün; I. Kantor; F. Maréchal : A heat integration method with multiple heat exchange interfaces; Energy. 2018-03-28. DOI : 10.1016/j.energy.2018.03.114.
[12]
I. D. Kantor; A. S. Wallerand; M. Kermani; H. E. Bütün; A. Santecchia et al. : Thermal profile construction for energy-intensive industrial sectors. 2018. 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guimaraes, Portugal, June 17-22, 2018.
[13]
H. Bütün; I. Kantor; A. Mian; F. Maréchal : A Heat Load Distribution Method for Retrofitting Heat Exchanger Networks, 28th European Symposium on Computer Aided Process Engineering; Computer Aided Chemical Engineering. 2018. DOI : 10.1016/B978-0-444-64235-6.50244-8.
[14]
M. Kermani; I. Kantor; F. Maréchal : Synthesis of Heat-Integrated Water Allocation Networks: A Meta-Analysis of Solution Strategies and Network Features; Energies. 2018. DOI : 10.3390/en11051158.
[15]
A. S. Wallerand; M. Kermani; I. D. Kantor; F. Maréchal : Optimal heat pump integration in industrial processes; Applied Energy. 2018. DOI : 10.1016/j.apenergy.2018.02.114.
[16]
A. S. Wallerand; M. Kermani; R. Voillat; I. D. Kantor; F. Maréchal : Optimal design of solar-assisted industrial processes considering heat pumping: Case study of a dairy; Renewable Energy. 2018. DOI : 10.1016/j.renene.2017.07.027.
[17]
M. Kermani; A. S. Wallerand; I. D. Kantor; F. Maréchal : Generic superstructure synthesis of organic Rankine cycles for waste heat recovery in industrial processes; Applied Energy. 2018. DOI : 10.1016/j.apenergy.2017.12.094.
[18]
M. Kermani; A. D. Celebi; A. S. Wallerand; A. V. Ensinas; I. D. Kantor et al. : Techno-Economic and Environmental Optimization of Palm-based Biorefineries in the Brazilian Context, 27th European Symposium on Computer Aided Process Engineering. 2017. 27th European Symposium on Computer Aided Process Engineering, Barcelona, Spain, October 1-5, 2017. p. 2611-2616. DOI : 10.1016/B978-0-444-63965-3.50437-2.
[19]
M. Kermani; A. S. Wallerand; I. D. Kantor; F. Maréchal : A Hybrid Methodology for Combined Interplant Heat, Water, and Power Integration. 2017. 27th European Symposium On Computer Aided Process Engineering, Barcelona, Spain, October 1-5, 2017. DOI : 10.1016/B978-0-444-63965-3.50330-5.
[20]
N. Ibric; E. Ahmetovic; Z. Kravanja; F. Marechal; M. Kermani : Synthesis of single and interplant non-isothermal water networks; Journal Of Environmental Management. 2017. DOI : 10.1016/j.jenvman.2017.05.001.
[21]
A. S. Wallerand; M. Kermani; I. D. Kantor; F. Maréchal : General Superstructure Synthesis and Bi-level Solution Strategy for Industrial Heat Pumping; 27th European Symposium on Computer Aided Process Engineering; Amsterdam: Elsevier, 2017. p. 1159-1164.
[22]
H. E. Bütün; I. D. Kantor; F. Maréchal : A process integration method with multiple heat exchange interfaces. 2017. 30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, San Diego, California, USA, July 2-6, 2017. p. 1447-1460.
[23]
E. Ahmetović; M. Suljkanović; Z. Kravanja; F. Maréchal; N. Ibrić et al. : Simultaneous optimisation of Multiple-Effect Evaporation Systems and Heat Exchanger Network. 2017. 20th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES'17), Tianjin, China, August 21-24, 2017.
[24]
M. Kermani; Z. Perin-Levasseur; M. Benali; L. Savulescu; F. Marechal : A novel MILP approach for simultaneous optimization of water and energy: Application to a Canadian softwood Kraft pulping mill; Computers & Chemical Engineering. 2017. DOI : 10.1016/j.compchemeng.2016.11.043.
[25]
A. D. Celebi; A. Ensinas; S. Sharma; F. Maréchal : Early-stage decision making approach for the selection of optimally integrated biorefinery processes; Energy. 2017. DOI : 10.1016/j.energy.2017.03.080.
[26]
N. Ibric; E. Ahmetović; Z. Kravanja; F. Maréchal; M. Kermani : Simultaneous synthesis of non-isothermal water networks integrated with process streams; Journal of Energy. 2017.
[27]
M. Kermani; I. D. Kantor; F. Maréchal : Combined water and energy integration in industrial processes with restricted connections. 2016. 2016 AIChE Annual Meeting, San Francesco, CA, USA, November 11-18, 2016.
[28]
E. Ahmetović; M. Suljkanović; Z. Kravanja; F. Maréchal; N. Ibrić et al. : Analysis, Synthesis and Optimization of Multiple-Effect Evaporation Systems using Mathematical Programming. 2016. 2016 AIChE Annual Meeting, San Francesco, CA, USA, November 11-18, 2016.
[29]
N. Ibrić; E. Ahmetović; Z. Kravanja; F. Maréchal; M. Kermani : Synthesis of non-isothermal water networks including process hot and cold streams. 2016. 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES), Piran, Slovenia, June 15–18,2016.
[30]
N. Ibrić; E. Ahmetović; Z. Kravanja; F. Maréchal; M. Kermani : Synthesis of non‒isothermal interplant water networks. 2016. 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES), Piran, Slovenia, June 15–18,2016.
[31]
Z. Dimitrova; F. Marechal : Efficiency Improvement for Vehicle Powertrains Using Energy Integration Techniques; International Journal Of Thermodynamics. 2016. DOI : 10.5541/ijot.5000148414.
[32]
A. D. Celebi; A. Viana Ensinas; S. Sharma; F. Maréchal : Early-stage decision making approach for the selection of optimally integrated biorefinery processes. 2016. The 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Portoroz, Slovenia, June 19-23, 2016. DOI : 10.1016/j.energy.2017.03.080.
[33]
S. L. Bungener; G. M. Van Eetvelde; F. Maréchal : Optimal Operations and Resilient Investments in Steam Networks; Frontiers in Energy Research. 2016. DOI : 10.3389/fenrg.2016.00001.
[34]
L. D. Lessard; P. Collet; M. Kermani; F. Maréchal : Environomic multi-objective optimization of an eco-industrial park. 2015. SETAC Europe 25th Annual Meeting, Barcelona, Catalonia, Spain, May 3-7, 2015.
[35]
E. Ahmetović; Z. Kravanja; F. Maréchal; N. Ibrić; M. Kermani : Applications of Pinch Analysis and Mathematical Programming Methods for Synthesizing Non-Isothermal Water Networks. 2015. 2015 AIChE Annual Meeting, Salt Lake City, UT, USA, November 8-13, 2015.
[36]
Z. Dimitrova; F. Maréchal : Energy integration study on a hybrid electric vehicle energy system, using process integration techniques; Applied Thermal Engineering. 2015. DOI : 10.1016/j.applthermaleng.2015.08.094.
[37]
S. Bungener; R. Hackl; G. Van Eetvelde; S. Harvey; F. Marechal : Multi-period analysis of heat integration measures in industrial clusters; Energy. 2015. DOI : 10.1016/j.energy.2015.09.023.
[38]
S. Fazlollahi; N. Schüler; F. Maréchal : A solid thermal storage model for the optimization of buildings operation strategy; Energy. 2015. DOI : 10.1016/j.energy.2015.04.085.
[39]
A. Mian; F. Maréchal; A. Viana Ensinas : Multi-objective optimization of SNG production from microalgae through hydrothermal gasification; Computers and Chemical Engineering. 2015. DOI : 10.1016/j.compchemeng.2015.01.013.
[40]
A. Selviaridis; B. Burg; A. S. Wallerand; F. Marechal; B. Michel : Thermo-Economic Analysis of a Trigeneration HCPVT Power Plant. 2015. CPV-11 International Conference on Concentrator Photovoltaic Systems, Aix-les-Bains, France, JUNE 13-15, 2015.
[41]
S. L. Bungener; G. M. Van Eetvelde; B. Descales; F. Maréchal : Resilient decision making in steam network investments. 2015. Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES), Kuching, Malaysia, August 22-27,2015. p. 73-78. DOI : 10.3303/Cet1545013.
[42]
S. L. Bungener; G. M. Van Eetvelde; F. Maréchal : Optimisation of unit investment and load shedding in a steam network facing undercapacity. 2015. ECOS 2015, Pau, France, June 30 - July 3, 2015.
[43]
M.-J. Yoo; L. Lessard; M. Kermani; F. Maréchal : OsmoseLua – An Integrated Approach to Energy Systems Integration with LCIA and GIS. 2015. p. 587-592. DOI : 10.1016/B978-0-444-63578-5.50093-1.
[44]
F. L.-P. R. M. Amblard : Geothermal energy integration in urban systems. The case study of the city of Lausanne. ; 2015.
[45]
M. Bendig : Integration of Organic Rankine Cycles for Waste Heat Recovery in Industrial Processes. Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6536.
[46]
S. Moret; L. Gerber; F. Amblard; E. Peduzzi; F. Maréchal : Geothermal Energy and Biomass Integration in Urban Systems: a Case Study. 2015. 40th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, USA, January 26-28, 2015.
[47]
N. Pouransari : Towards practical solutions for energy efficiency of large-scale industrial sites. Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6390.
[48]
T.-Nguyen; L. Tock; P. Breuhaus; F. Marechal; B. Elmegaard : Thermo-Economic Modelling and Process Integration of CO2-Mitigation Options on Oil and Gas Platforms. 2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Prague, Czech Republic, August 23-27, 2014. p. 1081-1086. DOI : 10.3303/CET1439181.
[49]
A. S. Wallerand; J. Queiroz Albarelli; A. Viana Ensinas; G. Ambrosetti; A. Mian et al. : Multi-objective Optimization of a Solar Assisted 1st and 2nd Generation Sugarcane Ethanol Production Plant. 2014. ECOS 2014 - THE 27TH INTERNATIONAL CONFERENCE ON EFFICIENCY, COST, OPTIMIZATION, SIMULATION AND ENVIRONMENTAL IMPACT OF ENERGY SYSTEMS, TURKU, FINLAND, JUNE 15-19, 2014.
[50]
S. Bungener : Modelling of a steam network using data reconciliation as a management tool ; Energy Systems Conference, London, June 24-25.
[51]
M. Bendig; D. Favrat; F. Marechal : Methodology for Identification of Suitable ORC-Cycle and Working-Fluid using Integration with Multiple Objectives. 2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014)', 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014). p. 1141-1146. DOI : 10.3303/Cet1439191.
[52]
M. Kermani; Z. Périn-Levasseur; M. Benali; L. Savulescu; F. Maréchal : An Improved Linear Programming Approach for Simultaneous Optimization of Water and Energy. 2014. p. 1561-1566. DOI : 10.1016/B978-0-444-63455-9.50095-7.
[53]
D. T. Santos; J. Q. Albarelli; M. A. Rostagno; A. V. Ensinas; F. Marechal et al. : New proposal for production of bioactive compounds by supercritical technology integrated to a sugarcane biorefinery; Clean Technologies And Environmental Policy. 2014. DOI : 10.1007/s10098-014-0760-5.
[54]
T.-V. Nguyen; L. Lock; P. Breuhaus; F. Marechal; B. Elmegaard : Oil and gas platforms with steam bottoming cycles: System integration and thermoenvironomic evaluation; Applied Energy. 2014. DOI : 10.1016/j.apenergy.2014.06.034.
[55]
J. Urech; L. Tock; T. Harkin; A. Hoadley; F. Maréchal : An assessment of different solvent-based capture technologies within an IGCC–CCS power plant; Energy. 2014. DOI : 10.1016/j.energy.2013.10.081.
[56]
M. Gatti; F. Marechal; E. Martelli; S. Consonni : Thermodynamic analysis, energy integration and flowsheet improvement of a methanol absorption acid gas removal process. 2013. p. 211-216. DOI : 10.3303/CET1335035.
[57]
S. L. Bungener; G. Van Eetvelde; F. Marechal : A methodology for creating sequential multi-period base-case scenarios for large data sets. 2013. PRES, Rhodes, Greece, September 29 - October 2, Greece. p. 1231-1236. DOI : 10.3303/CET1335205.
[58]
M. Kermani : Method for Combined Water-Energy Recovery in Industrial Processes ; 2013.
[59]
A. Mian; A. V. Ensinas; F. Maréchal : Multi-objective optimization of SNG production through hydrothermal gasification from microalgae. 2013. p. 337-342. DOI : 10.1016/B978-0-444-63234-0.50057-9.
[60]
M. Bendig; F. Maréchal; D. Favrat : Defining “Waste Heat” for industrial processes; Applied Thermal Engineering. 2013. DOI : 10.1016/j.applthermaleng.2013.03.020.
[61]
E. Bernier; F. Maréchal; R. Samson : Life cycle optimization of energy-intensive processes using eco-costs; The International Journal of Life Cycle Assessment. 2013. DOI : 10.1007/s11367-013-0560-x.
[62]
A. Mian; A. Viana Ensinas; F. Maréchal; G. Ambrosetti : Optimal Design of Solar Assisted Hydrothermal Gasification for Microalgae to Synthetic Natural Gas Conversion; CHEMIICAL ENGIINEERIING TRANSACTIIONS. 2013. DOI : 10.3303/CET1335168.
[63]
A. Viana Ensinas; V. Codina Gironès; J. Queiroz Albarelli; F. Maréchal; M. A. Silva : Thermo-Economic Optimization of Integrated First and Second Generation Sugarcane Ethanol Plant; CHEMICAL ENGINEERING TRANSACTIONS. 2013. DOI : 10.3303/CET1335087.
[64]
N. Pouransari; G. Bocquenet; F. Marechal : Site-scale process integration and utility optimization with multiple representations of heating and cooling requirements: Application to an existing chemical plant. 2013. The 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, GUILIN, CHINA, JULY 16-19, 2013.
[65]
E. Peduzzi; G. Boissonnet; G. Haarlemmer; F. Marechal : Process Integration of Lignocellulosic Biomass Pre-treatment in the Thermo-Chemical Production of F-T Fuels. Centralised Versus Decentralised Scenarios. 2013. PRES13 - 16th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Rhodes, Greece, 29 September - 2 October.
[66]
M. Bendig; F. Maréchal; D. Favrat : Methodology using process integration for identifying suitable Organic Rankine Cycles for waste heat valorisation ; International Process Integration Jubilee Conference 2013, Gothenburg, Sweden, March 18-20, 2013.
[67]
N. Pouransari : Multi-Layer Representation of Energy Requirement for Site Scale Integration ; International Process Integration Jubilee, Gothenburg, Chalmers, Sweden, March 18-20, 2013.
[68]
L. Tock; F. Maréchal : Energy integration optimisation of chilled ammonia process for CO2 capture. 2013. 9th European Congress of Chemical Engineering, The Hague, The Netherlands, April 21-25, 2013.
[69]
H. Becker; A. Vuillermoz; F. Maréchal : Heat pump integration in a cheese factory; Applied Thermal Engineering. 2012. DOI : 10.1016/j.applthermaleng.2011.11.050.
[70]
J. Urech : A Techno Assessment of Different Solvent- based Capture Technologies Within an IGCC-CCS Power-station ; 2012.
[71]
H. Becker; F. Maréchal : Targeting industrial heat pump integration in multi-period problems. 2012. p. 415-419. DOI : 10.1016/B978-0-444-59507-2.50075-5.
[72]
L. Tock; F. Maréchal : H2 processes with CO2 mitigation: Thermo-economic modeling and process integration; International Journal of Hydrogen Energy. 2012. DOI : 10.1016/j.ijhydene.2012.05.046.
[73]
H. C. Becker : Methodology and Thermo-Economic Optimization for Integration of Industrial Heat Pumps. Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5341.
[74]
E. Bernier; F. Maréchal; R. Samson : Optimal greenhouse gas emissions in NGCC plants integrating life cycle assessment; Energy. 2012. DOI : 10.1016/j.energy.2011.10.037.
[75]
M. Morandin; A. Toffolo; A. Lazzaretto; F. Maréchal; A. V. Ensinas et al. : Synthesis and parameter optimization of a combined sugar and ethanol production process integrated with a CHP system. 2011. p. 3675-3690. DOI : 10.1016/j.energy.2010.10.063.
[76]
F. Maréchal : Process integration aspects in the design of biofuel processes ; BBEST 2011 : 1st Brazilian BioEnergy Science and Technology Conference, Campos do Jordao, August 14-18,2011.
[77]
L. Tock; F. Maréchal : Thermo-chemical H2 production: Thermo-economic modeling and process integration. 2011. European Fuel Cell Forum, Lucerne, Switzerland, June 28- July 1, 2011.
[78]
L. Tock; F. Maréchal : Co-production of Hydrogen and Electricity from Lignocellulosic Biomass: Process Design and Thermo-economic Optimization. 2011. 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems , Novi Sad, Serbia, July 4-7, 2011. p. 339-349. DOI : 10.1016/j.energy.2012.01.056.
[79]
L. Gerber; F. Maréchal : Defining Optimal Configurations of Geothermal Systems Using Process Design and Process Integration Techniques. 2011. 14th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Florence, Italy, May 8-11, 2011. p. 881-886. DOI : 10.3303/CET1125147.
[80]
F. Maréchal : Process design methods for sustainable energy systems ; National Technical University of Athens, Erasmus exchange Seminar, National Technical University of Athens, February 17, 2011.
[81]
H. Becker; A. Vuillermoz; F. Maréchal : Heat pump integration in a cheese factory. 2011. 14th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Florence, Italy, May 8-11, 2011. p. 195-200. DOI : 10.3303/CET1125033.
[82]
F. Maréchal : Complete Advanced Energetics Course Notes. 2010.
[83]
M. Dumbliauskaite; H. Becker; F. Maréchal : Utility Optimization in a Brewery Process Based on Energy Integration Methodology. 2010. The 23th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switherland, June 14-18, 2010. p. 91-98.
[84]
L. Tock; F. Maréchal : Thermo-economic modeling of fuel decarbonization processes ; CCES Latsis Symposium 2010, Zürich, Switzerland, November 15-17, 2010.
[85]
L. Tock; M. Gassner; F. Maréchal : Thermo-economic Evaluation of the Thermochemical Production of Liquid Fuels from Biomass. 2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010), Lausanne, Switzerland, June 14-17, 2010.
[86]
M. Gassner; F. Vogel; F. Maréchal ; A process and a plant for hydrothermal SNG production from waste biomass. 2010P10758EP . 2010.
[87]
M. Gassner; F. Maréchal : Optimal technologies for the thermochemical production of Synthetic Natural Gas (SNG) from lignocellulosic biomass ; 18th European Biomass Conference and Exhibition, Lyon, France, May 3-7, 2010.
[88]
M. Gassner; F. Maréchal : Increasing Conversion Efficiency in Fuel Ethanol Production from Lignocellulosic Biomass by Polygeneration - and a Paradoxon between Energy and Exergy in Process Integration. 2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010), Lausanne, Switzerland, June 14-17, 2010.
[89]
M. Gassner; F. Vogel; F. Maréchal : Optimal Process Design of Hydrothermal SNG Production from Waste Biomass. 2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010), Lausanne, Switzerland, June 14-17, 2010.
[90]
L. Tock; F. Maréchal; C. Metzger; P. Arpentinier : Process Integration Analysis of an Industrial Hydrogen Production Process ; WHEC2010; 18th World Hydrogen Energy Conference 2010, Essen, Germany, May 16-21, 2010.
[91]
L. Tock; F. Maréchal; C. Metzger; P. Arpentinier : Process Integration Analysis of an Industrial Hydrogen Production Process. 2010. WHEC2010; 18th World Hydrogen Energy Conference 2010, Essen, Germany, May 16-21, 2010. p. 523.
[92]
M. Gassner : Process Design Methodology for Thermochemical Production of Fuels from Biomass. Lausanne, EPFL, 2010. DOI : 10.5075/epfl-thesis-4693.
[93]
L. Tock; M. Gassner; F. Maréchal : Thermochemical production of liquid fuels from biomass: Thermo-economic modeling, process design and process integration analysis; Biomass and Bioenergy. 2010. DOI : 10.1016/j.biombioe.2010.07.018.
[94]
M. Gassner; F. Maréchal : Combined mass and energy integration in process design at the example of membrane-based gas separation systems; Computers and Chemical Engineering. 2010. DOI : 10.1016/j.compchemeng.2010.06.019.
[95]
H. Becker; L. Girardin; F. Maréchal : Energy integration of industrial sites with heat exchange restrictions. 2010. p. 1141-1146. DOI : 10.1016/S1570-7946(10)28191-9.
[96]
M. Gassner; F. Maréchal : Process integration aspects of the design of a gas separation system for the upgrade of crude Synthetic Natural Gas (SNG) to grid quality in a wood to methane process. 2009. 10th International Symposium on Process Systems Engineering - PSE2009, Salvador Bahia, Brazil, August 16-20, 2009. p. 903-908. DOI : 10.1016/S1570-7946(09)70371-2.
[97]
M. Gassner; R. Baciocchi; M. François; M. Mazzotti : Integrated design of a gas separation system for the upgrade of crude SNG with membranes; Chemical engineering and processing. 2009. DOI : 10.1016/j.cep.2009.07.002.
[98]
Z. Périn-Levasseur : Energy efficiency and conversion in complex integrated industrial sites. Lausanne, EPFL, 2009. DOI : 10.5075/epfl-thesis-4433.
[99]
M. Gassner; F. Maréchal : Thermo-economic process model for thermochemical production of Synthetic Natural Gas (SNG) from lignocellulosic biomass; Biomass and Bioenergy. 2009. DOI : 10.1016/j.biombioe.2009.08.004.
[100]
D. Muller : Web-based tools for energy management in large companies applied to food industry. Lausanne, EPFL, 2007. DOI : 10.5075/epfl-thesis-3785.
[101]
N. Autissier; F. Palazzi; F. Maréchal; J. Van herle; D. Favrat : Thermo-economic Optimization of a Solid Oxide Fuel Cell, Gas Turbine Hybrid System; Journal of Fuel Cell Science and Technology. 2007. DOI : 10.1115/1.2714564.
[102]
N. Autissier; F. Palazzi; F. Maréchal; J. Van herle; D. Favrat : Thermo-economic Optimization of a Solid Oxide Fuel Cell, Gas Turbine Hybrid System. 2005. European Fuel Cell Conference, Roma, Italy, 14-16 dec. 2005. p. 249.
[103]
R. Bolliger; D. Favrat; F. Maréchal : Advanced Power Plant Design Methodology using Process Integration and Multi-Objective Thermo-Economic Optimisation. 2005. p. 777-784.
[104]
F. Maréchal; D. Favrat : Combined Exergy and Pinch Analysis for Optimal Energy Conversion Technologies Integration. 2005. p. 177-184.
[105]
B. Kalitventzeff; G. Heyen; H. Closon; B. Vrielynck; F. Marechal : How CAPE tools can contribute to process sustainability; Journal of Cleaner Production. 2004. DOI : 10.1016/S0959-6526(02)00185-3.
[106]
J. Godat; F. Maréchal : Combined optimisation and process integration techniques for the synthesis of fuel cells systems. 2003. p. 143-148.
[107]
M. Morandin; A. Toffolo; A. Lazzaretto; F. Maréchal; A. V. Ensinas et al. : SYNTHESIS AND PARAMETER OPTIMIZATION OF A COMBINED SUGAR AND ETHANOL PRODUCTION PROCESS INTEGRATED WITH A CHP SYSTEM Part 2: Maximization of total site net power. ECOS 2009, Foz do Iguaçu, Parana, Brazil, August 31-September 3, 2009.
[108]
M. Morandin; A. Toffolo; A. Lazzaretto; F. Maréchal; A. V. Ensinas et al. : SYNTHESIS AND PARAMETER OPTIMIZATION OF A COMBINED SUGAR AND ETHANOL PRODUCTION PROCESS INTEGRATED WITH A CHP SYSTEM Part 1: Minimization of the process external heat requirement. ECOS 2009, Foz do Iguaçu, Parana, Brazil, August 31-September 3, 2009.
[109]
R. Bolliger; H. Becker; F. Maréchal : New generic approach for the analysis of energy conversion system models. Process Systems Engineering, PSE’09, Salvador-Bahia-Brazil, August 16–20, 2009.